Welcome to the most efficient geyser available in SA!!
The Induction Geyser uses ONE THIRD less electricity than a conventional geyser !!
30 Litre Induction Geyser:
30 LITRE INDUCTION GEYSER INSTALLED:
Split magnetic water heating is a breakthrough in Geyser Technology which has obtained NCRS certification in South Africa.
This technology utilizes electrical energy to create a magnetic field within the Geyser to maximize the heating process, and when delivering the equivalent amount of hot water as a conventional Geyser it does so in 1/3rd less time saving you 30% plus in power consumption.
The first induction geyser unit to obtain NCRS certification was the 30 Litre unit.
The 50L and 75L induction geysers have subsequently also obtained NCRS certification in South Africa.
If you are looking to save space, save money, save energy and be more carbon neutral this is the Geyser of the Future.
SPLIT MAGNETIC INDUCTION GEYSER CONSISTS OF TWO PARTS:
- storage tank geyser
- induction heating unit
FEATURES:
- NCRS Certified in South Africa
- Factory fitted Temperature / Pressure valve included
- Includes Safety pressure valve
MULTIPLE PROTECTION from:
- Dry Burn
- Low/High heat
- Low Voltage < 90 volts
- High Voltage > 270 volts
TECHNICAL ASPECTS CN30L:
- Size 830 x 440 x 240
- weight 12 Kg
- 2000 watts
- wall mounted installation
- standard plumbing fittings
- Price: R6999 excl. courier
50 LITRE INDUCTION GEYSER INSTALLED:
TECHNICAL ASPECTS CN50L:
- Size 1080 x 440 x 240
- weight 19 Kg
- 2 x 2000 watts
- wall mounted installation
- standard plumbing fittings
- Price: R9699 excl. courier
75 LITRE INDUCTION GEYSER
TECHNICAL ASPECTS CN75L:
- Size 1390 x 530 x 290
- weight 31 Kg
- 2 x 2000 watts
- wall mounted installation
- standard plumbing fittings
- Price: R11999 excl. courier
The Harver Induction Geysers have a Class 2 safety rating, the first of its kind in the word, primarily because there is no transfer of alternating current (AC) into the water or the holding tank.
The geysers are fitted with a built in temperature - pressure valve to prevent rupture.
The units includes a high density thermal insulation layer around the storage tank, which is made of stainless steel and magnesium for increased product life.
The geyser draws between 2 - 4 kw of power depending on the size of the geyser.
The 30L geyser has a single 2000 watt induction heating unit.
The 50L and 75L geysers each have 2 x 2000 watt induction heating units - one on each side of the storage tank as per photos.
ELECTRICITY USAGE COMPARISON:
To heat a conventional 150 litre geyser from 20 deg C to 65 deg Celsius takes approximately two and a half hours and uses 7.8kw of electricity.
To heat the equivalent amount of water by means of an induction geyser process will take approximately 1 hour and uses approximately 2.5kw of electricity.
The operating cost is approximately ONE/THIRD less than the cost of a conventional geyser.
TECHNICAL SPECIFICATIONS
|
HOW DOES THE HARVER INDUCTION GEYSER WORK?
The energy from the electricity supply is converted into a magnetic field which then heats the water in the Harver Induction geyser via the Induction heating unit to the right of the storage tank.
The Induction process heats water a lot faster than a normal element in a conventional geyser does.
The storage tank includes a high density thermal layer, which sustains the water temperature.
The unit has protection from dry burn, overheat, low/high voltage and over heat protection.
No electrical connections or an element near the water gives the Harver Induction geyser a revolutionary class 2 safety factor.
INSTALLATION
A. Two installation support brackets are attached to the back of the geyser. These brackets provide for simple and secure mounting using 2 sturdy expanding rawl bolts drilled into the wall.
B. The water heater is fitted with a 1.5m wired power cable and a 15 AMP 3 pin plug which simply plugs into a standard wall socket.
C. The Induction Geyser is designed for indoor use. If used outdoors the unit must be covered from direct rain and sunlight.
D. The water heater has a high thermal insulation layer around the stainless steel & magnesium storage tank providing for increased product life.
E. The temperature is adjustable between 40 - 75 degrees Celsius in 5 degrees increments via the temperature setting button.
Prices:
Power |
Model |
Size (LxDxH) |
Weight |
Price |
2000 w |
30 Litre |
830x440x240 |
12kg |
R6999 |
4000 w |
50 Litre |
1080x440x240 |
19kg |
R9699 |
4000 w |
75 Litre |
1390x530x290 |
31kg |
R11999 |
For any further info kindly call Paul Nipper at Tel: 072 30 50 155 during office hours.
To order an Induction Geyser CLICK HERE
Home | Enquire | Order | Become a Distributor | © 2002 - 2022 Nipper Enterprises